ViewTube

Adding a lamp to the mill. A lamp that can be moved to a better position to prevent glare from the light.

We take a look around the show.

Making a sine bar to fit the compound slide How to set the sine bar see also compound slide milling ...

17th to 20th October 2024 A quick look at what was at the show.

Making some clamping washers with a spherical face to centralise the clamp How to make the radius cutter ...

We take a look at a set of collet blocks (square and hexagon) and how to use them.

Making an offset tool tip holder and setting bar for the radius cutter. 4 jaw chuck work, using your chuck as a dividing head. Milling ...

Making a lathe tool to cut internal sphericals.

Turning a form using a router tool. Shaping some spanner flats in the lathe. Making some small bore comparator rods.

Making a draw bar that fits an ER20 and ER32 collet holder with 1/2" and 10mm threads.

Making a collet that will hold taps in a Die holder on the lathe.

A guide bush to use a standard diestock on your tailstock guide bar.

A snap shot of all the videos from last year.

Making tool clamping screws from some threaded bar.

After 3 years Retest the motor and compaire speed to the listed speeds. You may like Fitting an inverter and motor Part 1& 2 ...

Using 3D printed items to make an imperial thread dial.

Lathe upgrades over the years made to improve the lathe and some top tips.