ViewTube

To get sufficient reach on an extra-long thread, we need an extra-long socket wrench. A piece of pipe and some scrap is enough ...

Welding bushings and a new bottom on the buckets of the mini digger. I also test gasless welding wire for the MIG.

Making new pins and some bushings for the buckets of the mini digger. I also test gasless welding wire for the MIG.

Making new pins and some bushings for the buckets of the mini digger. That's a job for the Celtic lathe.

I have to cut threads M18 on two bars, to make spacers for the tramway. And I also have to weld an extension on the handle of a ...

As promised, here is some footage of the mini digger on rails. And I have to make a little part for a window blind. It's a bit more ...

To be able do drive the mini-digger on the rails, we need to mount some wheels. It's a little more complicated than it seems.

To be able do drive the mini-digger on the rails, we need to mount some wheels. It's a little more complicated than it seems.

To be able do drive the mini-digger on the rails, we need to mount some wheels. It's a little more complicated than it seems.

To be able do drive the mini-digger on the rails, we need to mount some wheels. It's a little more complicated than it seems.

Znext-solver: what, why, and when - lcnr at EuroRust 2025 The type system of Rust is one of its main selling points. Users rely on it ...

An easy way to cut slots perfectly in center in the shaper. Make sure to watch part 1.

Making a toolholder for the shaper and talking talking about cutting speed.

Can we use carbide inserts in the shaper? Let's find out! Rustinox stickers available at; rustinox@outlook.com Sierra Specialty ...

An easy way to cut slots perfectly in center in a cylindrical workpiece. Make sure to watch part 2. https://youtu.be/J1O1j_3nKvU.

Collet blocks are very handy to make bolt heads. In this video I make one that I can use with my Deckel collets.

Using the shaper to cut gears, using a wire or a rack to generate the involute of the teeth.

Green Leaves by Audionautix (http://audionautix.com) is part of the YouTube Audio Library (https://www.youtube.com/audiolibrary/ ...

My lathe dosn't parting off. So, let's try with the parting blade on the back side. Tom's video ...